CMP / Keller©
Boat Racing Hardware
Steering
(Prices subject to change without notice.)
1885 Steering drum and base, 5" diameter, (shown with drum,
right, removed from base and shaft, left) machined from 6061-T6 aluminum then
clear
anodized, stainless steel shaft, steering tension adjustable via
easy-to-access 15/16" nylock nut at center of wheel, mounting bolt location
template included, stainless steel
mounting bolts, washers, and nylock nuts included, $123.95 each.
1885F12, Steering Wheel Assembly, front view, see description
below.
1885F12,
Steering Wheel Assembly, side view, 12" black soft vinyl rim, dished 3-spoke wheel
with stainless steel spokes, 5" drum and base machined from 6061-T6 aluminum then
clear
anodized, stainless steel shaft, steering tension adjustable via
easy-to-access 15/16" nylock nut at center of wheel, stainless steel
mounting bolts, washers, and nylock nuts included, $168.90 each.
188 Steering drum and base, 3.25" diameter, (shown with drum,
right, removed from base and shaft, left) machined from 6061-T6 aluminum then
clear
anodized, stainless steel shaft, steering tension adjustable via
easy-to-access 15/16" nylock nut at center of wheel, mounting bolt location
template included, stainless steel
mounting bolts, washers, and nylock nuts included, $99.95 each.
188F12,
Steering Wheel Assembly, 12" black soft vinyl rim, dished 3-spoke wheel
with stainless steel spokes, 3.25" drum and base machined from 6061-T6 aluminum then
clear
anodized, stainless steel shaft, steering tension adjustable via
easy-to-access 15/16" nylock nut at center of wheel, stainless steel
mounting bolts, washers, and nylock nuts included, $144.90 each.
4R, Steering bar pulley, large, heavy duty (two pulleys shown), 2.5" nylon
sheave, heavy duty side plates, stainless steel fittings, black powder
coat satin
finish, $17.95 each.
8F, Steering bar pulley, small, heavy duty (two pulleys shown), 1 5/8" Delrin
Acetel sheave, heavy duty side plates, stainless steel fittings, black
powder coat satin finish, $17.95 each.
203S, Snap Hook (two hooks shown), 5/16", spring loaded interlocking
gate, plated steel, straight sides (not pinched), fits easily into 8F and 4R
pulleys, connects pulley to steering bar, $5.95 each.
203T, Thimble, (two shown) stainless steel, for 3/16" steering line,
$1.95
each.
211, Shackle (two shackles shown), 5/16", used to connect
pulley to steering bar, galvanized steel, $3.95 each.
316, Steering Line Clamp (two clamps shown), for 3/16" steering line,
plated steel, $2.49 each.
136, Steering Line Fairlead (two fairleads are shown), guides 3/16" steering line
through deck, cast aluminum, black powder coat satin finish, sanded edge accent highlight,
stainless steel screws, washers, nylock nuts included, $12.95 each.
501, Stainless Fairlead (two fairleads are shown), guides steering
line, bowden cable, etc., up to 1/2" in diameter, on angle through
deck or cockpit side, polished stainless finish, raised rub area, approximately
1-1/4" x 3-1/4", stainless steel screws, washers, nylock nuts
included, $6.95 each.
181, Steering line anchor (sometimes called "tie-back", two
clamps are shown), anchors end of steering line to cockpit side, cast aluminum,
black powder coat satin finish, sanded accent highlight, stainless steel
screws, $17.95 each.
1225, Coaming pulley, 15 degree base angle (two pulleys shown), directs
steering from drum through cockpit side and back to steering bar, cast aluminum,
black powder coat satin finish, sanded accent highlight, 1 5/8" Delrin
Acetel sheave, mounting template included, stainless steel screws and finish
washers included, $19.95 each. 122 Coaming pulley with 90 degree base is
similar.
502, Internal Coaming Pulley (two pulleys are shown), stainless steel
construction with black plastic sheave and guide, Delrin ball bearings,
typically used in hulls where the coaming pulley is mounted internally behind
the cockpit side and under the deck, for line up to 5/16" diameter, 90
degree base, stainless steel screws, washers, and nylock nuts included, $14.95
each.
F11, Steering Wheel, 11" diameter, wheel only, black soft vinyl rim, dished 3-spoke
wheel with stainless steel spokes, $43.95 each.
F12, Steering Wheel, 12" diameter, wheel only, black soft vinyl rim, dished 3-spoke
wheel with stainless steel spokes, $44.95 each.
F13, Steering Wheel, 13" diameter, wheel only, black soft vinyl
rim, dished 3-spoke wheel with staineless steel spokes, $45.95 each.
188EXT5, Steering extension, 5", 5" in length, machined from 6061-T6 aluminum then
clear
anodized, mounts between steering drum and wheel, fits 188 and 1885 steering
wheel assemblies, moves wheel 5" aft, stainless steel bolts included, $39.95 each.
188EXT3, Steering extension, 3", 3" in length, machined from 6061-T6 aluminum then
clear
anodized, mounts between steering drum and wheel, fits 188 and 1885 steering
wheel assemblies, moves wheel 3" aft, stainless steel bolts included, $37.95 each.
Some
items are only available on special order.
